You are here :   Home » Blog » Concrete Applications
 
 
Blog - Concrete Applications

   


Concrete Applications

Patriot Ridge Plaza Form Liners  

Patriot Ridge Plaza

Patriot Ridge Plaza

Springfield, Virginia

This is the first phase of a three-phase project. Adjacent to Fort Belvoir and the National Geospatial-Intelligence Agency visitor gate, Patriot Ridge encompasses 15 acres with a plan for the development of a four-building campus. Retail space and two parking garages are also included in the plan. This project also had to comply with Antiterrorism/Force Protection (AT/FP) requirements.

Patriot Ridge Plaza PlanThe centerpiece of this project is the central plaza.  This plaza consisted of free-form concrete garden walls as well as concrete serpentine bench seating with integral lights throughout. The vision of the architect was to construct tiered but parallel serpentine walls.  Every bench was over 200 feet long with 10 or more varying radius.  To construct these using traditional methods would have been virtually impossible, but Trimtec Systems had the solution.   

Trimtec was able to produce EPS foam form liners with a hard coat that not only created the profile of the bench, but also could be used to ensure the correct layout of the walls.  Trimtec also provided datum lines for locating the center points of all the radius’s required for the project. 

concrete form liners

Despite all the complexities of this job, it turned out beautifully and Trimtec is very proud to have contributed to that end.  

concrete form liners

concrete form liners

Patriot Ridge Plaza

Patriot Ridge Plaza

Springfield, Virginia

This is the first phase of a three-phase project. Adjacent to Fort Belvoir and the National Geospatial-Intelligence Agency visitor gate, Patriot Ridge encompasses 15 acres with a plan for the development of a four-building campus. Retail space and two parking garages are also included in the plan. This project also had to comply with Antiterrorism/Force Protection (AT/FP) requirements.

Patriot Ridge Plaza PlanThe centerpiece of this project is the central plaza.  This plaza consisted of free-form concrete garden walls as well as concrete serpentine bench seating with integral lights throughout. The vision of the architect was to construct tiered but parallel serpentine walls.  Every bench was over 200 feet long with 10 or more varying radius.  To construct these using traditional methods would have been virtually impossible, but Trimtec Systems had the solution.   

Trimtec was able to produce EPS foam form liners with a hard coat that not only created the profile of the bench, but also could be used to ensure the correct layout of the walls.  Trimtec also provided datum lines for locating the center points of all the radius’s required for the project. 

concrete form liners

Despite all the complexities of this job, it turned out beautifully and Trimtec is very proud to have contributed to that end.  

concrete form liners

concrete form liners

Close Close

Published on 27/02/2015 @ 14:47   All the posts   Top


Comments

Nobody gave a comment yet.
Be the first to do so!

Categories

last posts
Archives
03-2017 April 2017
S M T W T F S
            01
02 03 04 05 06 07 08
09 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30            

Trimtec Systems • Trimtec Engineered Packaging  E-mail: tts@trimtecsystems.com

Corporate Office:

2455 Harrisburg Pike., Grove City, Ohio 43123 • 

Phone 614-820-0340 • Fax 614-820-0341 •

©2016-2012 Trimtec Systems, LTD

Designed by  MDF Graphics

  Privacy | Terms Of Service | Site Map