You are here :   Home » Flotation
 
 
rss This article is available in the standard RSS format for publication on your website :
http://www.trimtecfoam.com/data/en-articles.xml

EPS flotation foam

  • Rotationally molded outer shell – no seams
  • 100% Virgin Grade LLDPE and Expanded Polystyrene (EPS)
  • Expanded Polystyrene (EPS) foam filled for maximum buoyancy
  • Unique FLASH DOT feature for night docking
  • Thick mounting flanges and slots for ease of installation
  • .150 nominal wall thickness
  • Sizes range from 8” – 32” depths
  • 203 lbs. buoyancy – 4804 lbs. buoyancy
  • NEW SIZE: 12” x 48” x 12” float
  • Full line of dock protection, hardware & accessories
  • Industry leading 15 YEAR WARRANTY

 

Float Specifications

EPS Foam Flotation


All Trimtec System floats are made from virgin Linear Low Density Polyethylene resin. This resin contains UV inhibitors and Carbon black to protect from deterioration caused by U.V. light. the resin offers a balance of toughness, rigidity environmental stress crack resistance and low temperature impact performance.

All Trimtec System floats are rotationally molded for a seamless one piece construction. The encasement is resistant to damage by
animals and will not sink nor contaminate the waters if punctured. Content of the encasement is Expanded Polystyrene foam with a nominal density of 1 Lb/Cu.Ft. The nominal wall thickness of the encasement is 0.150" with a minimum wall thickness of 0.125". Custom thicknesses can be manufactured to specific requirements. The resin used in the encasement exhibits resilience against ice, bumping by watercraft and
degradation caused by petroleum products. The encasement is recyclable.

All Trimtec System floats are filled with virgin expanded Polystyrene beads and then fused using steam. This increases the strength of the float as well as providing a back up flotation system in the unlikely event of catastrophic damage to the encasement. The flotation material used meets the higher UL94H and ASTM E84 requirement for flammability.

 

Design & Estimating

Don't see what you need?  Through the use of CAD design and engineered computer cut construction techniques, we are able to produce virtually any design or style of Expanded Polystyrene (EPS) Foam Flotation.

Call us today! 614-820-0340. We will provide you with a FREE quote and answer any questions


Category : - EPS Foam

Trimtec Systems • Trimtec Engineered Packaging  E-mail: tts@trimtecsystems.com

Corporate Office:

2455 Harrisburg Pike., Grove City, Ohio 43123 • 

Phone 614-820-0340 • Fax 614-820-0341 •

©2016-2012 Trimtec Systems, LTD

Designed by  MDF Graphics

  Privacy | Terms Of Service | Site Map