All Trimtec System floats are made from virgin Linear Low Density Polyethylene resin. This resin contains UV inhibitors and Carbon black to protect from deterioration caused by U.V. light. the resin offers a balance of toughness, rigidity environmental stress crack resistance and low temperature impact performance.
All Trimtec System floats are rotationally molded for a seamless one piece construction. The encasement is resistant to damage by
animals and will not sink nor contaminate the waters if punctured. Content of the encasement is Expanded Polystyrene foam with a nominal density of 1 Lb/Cu.Ft. The nominal wall thickness of the encasement is 0.150" with a minimum wall thickness of 0.125". Custom thicknesses can be manufactured to specific requirements. The resin used in the encasement exhibits resilience against ice, bumping by watercraft and
degradation caused by petroleum products. The encasement is recyclable.
All Trimtec System floats are filled with virgin expanded Polystyrene beads and then fused using steam. This increases the strength of the float as well as providing a back up flotation system in the unlikely event of catastrophic damage to the encasement. The flotation material used meets the higher UL94H and ASTM E84 requirement for flammability.
Don't see what you need? Through the use of CAD design and engineered computer cut construction techniques, we are able to produce virtually any design or style of Expanded Polystyrene (EPS) Foam Flotation.
Call us today! 614-820-0340. We will provide you with a FREE quote and answer any questions